Use of cascade reduction potential for selective precipitation of Au,Cu, and Pb in hydrochloric acid solution

Optimization of reduction potential for electroseparation was studied for the recovery of gold, copper, and lead from acidic solution. A linear sweep voltammetric method enabled us to determine characteristic reduction potentials for each metal and the kinetics of the metal deposition indicated by current-voltage curves. In order to precipitate the metal species sequentially, reduction potentials were examined for the individual and mixed solutions of Au(III), Cu(II), and Pb(II). The three metals were reasonably well isolated from the mixed solutions such as Cu(II)/ Pb(II) and Au(III)/Cu(II)/Pb(II) in the order of the corresponding reduction potentials, in particular, the mass transfer controlled reduction potentials, obtained from linear sweep voltammetry (LSV) measurement.     

采用高速剪切反应器生产超细氧化铋工艺探讨

利用硝酸铋溶液和碳酸铵溶液为原料，采用高速剪切反应器，500℃煅烧后可以生产出高纯、超细的氧化铋粉末。该方法制备出的氧化铋平均粒度0．71μm且粒度范围分布窄，颗粒形貌为类球形，晶相为纯α相，指标达到电子压敏陶瓷要求。由于粒度细小，可以在电子压敏陶瓷球磨工艺减少球磨工艺，并具有更好的分散效果。本文对超细的氧化铋粉末形成机理也进行了探讨。     

氮化硅结合碳化硅管状制品的研制

简介了氮化硅结合碳化硅管状制品研制的必要性 ,确定了原材料及粒度配比 ,选择了合适的成型方法及添加剂 ,介绍了氮化烧成机理。研制出的制品其质量和使用性能接近同类进口产品 ,具有良好的市场前景和广泛的推广应用价值。     

A Comparison of the Levels of Lutein and Zeaxanthin in Corn Germ Oil,Corn Fiber Oil and Corn Kernel Oil

All commercial corn oil is obtained by pressing corn germ and/or extracting the germ with hexane. In the current study, six types of corn oil were prepared by extracting corn germ, corn fiber and ground corn, each with hexane or with ethanol. The levels of lutein, zeaxanthin and other carotenoids were quantitatively analyzed in the six corn oils. The levels of lutein + zeaxanthin in the oil ranged from 2.3 μg/g for hexane-extracted corn germ oil to 220.9 μg/g for ethanol-extracted ground corn oil. These results indicate that a diet that includes 30 g (~2 tbsp) per day of the unrefined corn oil obtained by extracting ground corn with ethanol would provide ~6 mg of lutein + zeaxanthin, the daily dosage that is currently considered to be necessary to slow the progression of age-related macular degeneration. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

原子吸收法测定液态醋酸钴锰混液中钴、锰含量方法探讨

原子吸收法测定液态醋酸钴锰中钴、锰含量的结果与X-射线荧光仪法测定结果进行比较,结果表明,精密度、准确度、误差和符合性较好,可以替代后者。     

耐磨抗冲击氧化铝陶瓷异型件的研制

主要研究了高铝快速磨罐、弧形衬板、球磨机磨口、研钵等异型件的配方及注浆成型工艺。试验配制了高铝泥浆用复合稀释荆及复合添加剂，使制品的显微结构均匀，密度得到了显著提高。     

Bi2—xPbxSr2Ca2Cu3Oy系高Tc超导体相变的研究

用DSC研究了高T_e超导体B_(2-r)Pb_rSr_2Ca_2Cu_sO_v(x=0,0.2,0.4,0.6)从室温至600℃范围内的相变。在320℃和440℃附近有二个吸热蜂,每一个峰对应一个相变过程。440℃附近的相变是不可递的,其原子激活能为1.37eV,是由高T_e相向低T_e相的转变。而320℃附近的相变则与超结构的形成有关。     

Partial oxidation of methane to synthesis gas over α-Al2O3-supported bimetallic Pt–Co catalysts

The partial oxidation of methane to synthesis gas was studied at atmospheric pressure and in the temperature range of 550–800°C over -Al₂O₃-supported bimetallic Pt–Co, and monometallic Pt and Co catalysts, respectively. Both methane conversion and CO selectivity over a bimetallic Pt_0.5Co₁ catalyst were higher than those over monometallic Pt_0.5 and Co₁ catalysts. Furthermore, the addition of platinum in Pt–Co bimetallic catalysts effectively improved their resistance to carbon deposition with no coking occurring on Pt_0.5Co₁ during 80 h reaction. The FTIR study of CO adsorption observed only linearly bonded CO on bimetallic Pt–Co catalysts. TPR and XPS showed enhanced formation of a cobalt surface phase (CSP) in bimetallic Pt–Co catalysts. The origins of the good coking resistivity of bimetallic Pt–Co catalysts were discussed.     

炭黑生产工艺的进展

介绍了较为成熟的炭黑生产工艺,讨论了其各自在工业应用方面的前景,并对近年来涌现出的一些具有可应用前景的工艺方法进行了简要评述,同时也归纳了近几年炭黑生产工艺的进展表现。     

不同地区不同等级复烤烟叶中重要致香物质的分析比较

本文采用同时蒸馏萃取(SDE)/气相色谱/质谱联用法(GC/MS)对相同品种、不同地区、不同等级复烤烟叶中的重要致香物质进行分析比较;并且对同时蒸馏萃取法进行重复性和回收率试验。结果表明相同品种、不同地区、不同等级复烤烟叶中重要致香物质的含量差别较大;同时蒸馏萃取法具有良好的重复性和较高的回收率。